Here are some Friends Ride's
Page last 3/2/03

Jerry Johnston's '63 Vert with an LS6

This car is simply awesome.. How about and LS6/T56 combo?? ZOOM ZOOM is all I can think of... He has a Heidts clip, rock valley tank, global west frame connectors, ididt polished column, and the plans are in the works for a mini tub and some body detailing.. Lookin good!


Mark Gavlik's '66, Corpus Christi, TX

This car has had alot of time put into it, detailed engine compartment, new interior with
99 Ford Escort buckets. It has a 355/TH350 Combo with 4.56 rear end in it, current plans
are to go to a 700R4 and either 3.55's or a 3.73 rear end!


Dennis Moore's '64

This car is fast! Here's the motivation behind the 9 second timeslips; It's a Supercharged 358ci
SBC with a Commander 950 EFI. It's street legal and ran 9.64 @140mph with 15psi and 75hp N2O. Heres
a link to Dennis' Home page


Duane's future Ramjet 502 '63 Deuce!

This was a nice car already and Duane decided to do a slight make over! Threw a currie rear end under there
and new floor pans. A 502 will find its way up front for motivation, which should move it along rather nicely!
Here is a link to Duane's Home Page.


Rich Rulau's '63 SS Ragtop, Houston TX

Rich knows nova's. This car has a stroker 383 with edelbrock RPM heads/cam/intake and carb and a
700R4 behind it. This car has a weld in clip, dakotal digital, Vintage air and an s10 tilt column. Here's
a link to Rich's Home page.


Rich Rulau's '65 Wagon, Houston TX

This '65 wagon is gonna rock! Welded in clip, airbags all the way around and a 427 big block! He's always
working on customer's cars so when he finds the time he'll turn a wrench on his wagon. Here's a
link to Rich's Wagon Page.


Tim's '63 SS

This car is gonna be nice! The detail on this car is killer. He had a zz4 short block but has since changed
directions and is going with a built 396. Tubbed rear end, dot slicks and a 4 link will help this car hook up..
Keep it up Tim! Here's a link to Tim's Home Page.


Wayne Due's Corvette IFS, Marysville WA

Here is Wayne's adaption of late model corvette suspension. He's going with some smaller rubber
out front for obvious reasons. He builds these type of front end for several different models
of cars including camaros and chevelles..


Scott Abbot's '64 Delivery

Scott's wagon was a cover car several years ago. Had to post pics of the cool little wagons he
makes! This cat can make anything out of fiberglass... Hopefully will be getting a set of glass
front and rear bumpers from him! Here's a link to Scott's Home page.


Spotters Red '66

Its a true 66 SS with some "minor" mods... 355 flat top's with 64cc World Sportsman II heads,
healthy Lunati cam (292/480), Performer RPM intake, Demon carb. The car rides on a Fatman Fab's
front end and a 12 bolt rear end with 4:10 gears. Its a 4-speed car with an M-21 muncie tranny.
The Weld prostars are 15x7 and 15x8 both with 4 1/2 backspacing wrapped in BFG rubber.


Don't know this guy.. seen it at a carshow!

This car is running a Chassisworks clip with a 355 on nitrous. Plenty of guages, dual fuel
solenoids and a cage get this car down the road very well. Stunning car...


This is Brad G's 66 Outta Seattle washington

Brad's '66 sports a 388 with 10.1 compression, 294 roller, th350 and a 3800 rpm stall..
He's currently running 12.9's